How to

How to Reset Beats Solo-Help Guide

February 22, 2022

939

Beats Solo is an American brand that Manufacturer Audio products. Here in this post, you will know about How to Reset Beats Solo, Resetting them is easy and can be helpful if there are any minor errors while using them.

For example, if there is a problem in pairing them, you just have to reset them might the problem get solved.

Table of Contents

Reset Beats Solo

General Instruction :

You can hard reset many Beats Solo headphones, by following these two easy steps.

It is necessary to hold down the volume down button as well as to hold the power button/mode button at the same time, for 10 – 15 seconds.
Once the fuel gauge light starts flashing, you can release both buttons simultaneously.

That’s it, you have Hard/Factory reset beats solo headphones.

What Will Happen After Resetting Beats Solo

As you have reset the headphones, all the settings and paired devices will be forgotten and set to default.

That means you have to pair your headphones, once again with every device, it was connected to.

To pair it properly, you can also delete beats solo from your mobile phone or device. Then pair it again, this might resolve any minor issue it was having.

To Learn How to Reset Beats Solo Headphone & Speakers?

Here is the list of Beats Solo audio products and how to reset them.

Beats Solo Pro

For ten seconds, you can press and hold the Mode Button and the appropriate Power Button.
You can Release buttons when the LED light will flash in Red Color.

That’s it, you have successfully reset your headphones

Beats Studio 3 (Wireless)

For ten seconds, you can press and hold down the Power Button along with the appropriate volume down button for your device.
Release the buttons as soon as you see the fuel gauge flash.

I hope the above step-by-step instructions will guide you through resetting Beats Studio 3 without getting into any trouble.

Beats Studio/Studio Wireless

You can keep the power button pressed for 10 seconds.
After 10 Seconds, Release Buttons, you will see all of the fuel gauge lights are indicating, all lights will blink white then one will blink red.
This sequence will happen three times.
After that, the flash will stop blinking which means you have reset the headphones successfully.

Now pair it again to continue using.

Beats Solo 3

For ten seconds, you can press and hold down the Power Button along with the appropriate volume down button for your device.
You can release the buttons as soon as you see the fuel gauge flash.

Now, you have reset Beats Solo 3, pair it again to continue using.

Beats Solo 2

Unplug your earphones from charging, as you can’t reset Beats Solo 2 while charging.
You can keep the power button pressed for 10 seconds.
You can let go of the power button after 10 seconds.
Now, you will see the LED Light Indicator will be blinking.
Of course, there will be two lights blinking white, and another blinking red, and this will happen three times.
If the light stops flashing, that means you’ve reset the earphones.

Solo Wireless

First, switch off the headset.
Hold down Multifunctional Button + Power Button (8 Seconds)
Check periodically and once the red and blue indicator lights alternate three or more times then it’s time to release the button here.

Power Beats (Wireless)

Hold down Power Button + Volume Down Button (10 Seconds)
Release buttons – LED Light Flashes.

You have successfully done a reset of Power Beats, now pair it again to continue using.

Powerbeats Pro

You have to put both Powerbeats Pro back in the charging case.
Now hold the button, which is inside the case, until the indicator light is flashing red and white.
If you are seeing a white light, that means you have successfully reset the earphone. Now they are ready for pairing.

Other Article by Error Express – HOW TO DIFFERENTIATE BETWEEN HEADPHONE AND EARPHONE?

Beats Pill +

Plugin you Beats Pill+ Speaker into the power source
Turn it ON
Hold down ‘b’ button + Power button (6 Seconds)
The fuel gauge will flash in red color 6 times.

This means you have reset the Beats Pill + Speaker.

Beats X Wireless

Hold down – Power Button + Volume Down Button (10 Seconds)
Release the button when the red light starts flashing.

That means you have reset the Beats X Wireless.

That’s it for this article, I hope this article covers your Beats Solo Product, if not then Comment down, we will reply to you soon…

Thanks For Reading!

How to Reset Amazon fire TV Follow these simple [ 3 ways](Opens in a new browser tab)