In this article, all you need to know about how to start a car with a bad crankshaft sensor. The car engine is a very sensitive part of your engine. Your bad crankshaft sensor can damage your car engine. Here are all the symptoms of the bad sensor. Also, the solution to problems associated with bad crankshaft sensors is mentioned here.
Table of Contents
How to start a car with a bad crankshaft sensor?
The bad crank sensor is the major cause of engine failure. Most people ignore this cause and keep moving in their cars. That leads to bigger problems for the car engine in the future. If you can detect a car with a bad crankshaft then you can save that car from future damage. All you have to do is a little repair. The best symptom of a car with a bad crankshaft is that it does not start easily. engine management must keep the car working for years.
Here is an explanation of how to start a car with a bad crankshaft sensor. If you are facing the same problem with your car give it a good read.
What is a crankshaft sensor?
In simple words, the crankshaft sensor gives information to the engine about starting. It manages the position of the crankshaft. And it properly does the ignition timing. Which leads to the engine starting as soon as you put the key in it. But the bad crankshaft engine position sensor makes it hard for the engine to start. By not properly managing the position of the crankshaft. So having a good crankshaft sensor is very easy and necessary.
Symptoms of a bad crankshaft sensor
Here are some common symptoms of a bad crankshaft sensor in your car. If you are noticing these in your car then you should check your car engine.
- Engine vibration
- Difficulty in starting the engine
- Poor fuel economy. Your car will not give the desired mileage.
- Rough idle
These are the most common symptoms. Closely check your car for these symptoms. If any of the above systems persist you have to check your car.
Solution for bad crankshaft sensor
If your crankshaft sensor has been damaged then the only solution for this problem is the replacement of the crankshaft sensor. So it is advised to do this as soon as you notice that your sensor has been damaged. You can temporarily fix the issue associated with this problem. Like you may find some alternate way to start the car engine. But still, your engine will be endangered. So make sure that you do not acquire the temporary methods as a permanent solution. Go to a car repair place and make your car fixed. This way you will increase your car life. If you are living in a cold weather country then the chances of having this problem increase.
Tips to start a car with a bad crankshaft sensor
Here are some steps to start your car. If this condition happens more than twice then immediately go to a repair shop.
1) To start the car you will need a starting fluid. You can easily find this fluid in the market. So make sure that you arrange this before starting to fix your car.
2) First, locate the crankshaft sensor in your car. You can take help from youtube with the manual guide to locating the crankshaft sensor. If you are a beginner then you may take some time to find this.
3) You will see a spark plug on the opening of the sensor. Remove that plug carefully.
4) Now fill the fluid in the sensor.
5) If the car still does not start then it may be due to the spark plug default or it may be due to the fuel missing its place. So you can either drop more fuel in the place. Or you can replace the plug.
6) After doing all this your car will start. Make sure that you do not go on and off with your car. Otherwise, it will permanently shut off.
These are the only ways to start your car with a bad crankshaft sensor. The more you feel this problem the more your engine is damaged. And once your engine is damaged you have to replace the whole engine which will cost thousands of dollars.
The overall cost of the crankshaft sensor replacement
If your car is in the initial stage of the crankshaft sensor damage then you have to pay almost half for the damage. Because the future damage will cost thousands of dollars, make sure that you go to a repair shop as soon as you notice some discomfort with the car. However, the starting fluid will cost only $20. And the overall replacement can cost you around $500. However, it also depends on what type of car you have and how much damage has already been happening. So there are a lot of factors that decide the car damage.
In conclusion, here are all the things that you can do to start your car if you are having a bad crankshaft sensor. The sensor plays a great role in starting your car. So any damage to the sensor leads to engine damage and the problem with the car starting. The best solution for the problem is sensor replacement. Make sure that you replace your sensor as soon as possible. Because it took a very small time to damage your engine after the car sensor became damaged. Here is everything that you can do to protect your engine. Hope you all will find this helpful.