License plate lights play a very crucial role. These lights help the police to recognize the number even at night. And if your license plate light has turned off then be ready to pay a fine and for a pullover. So you must replace these lights if they have turned off for any reason. Here is the guide for how to change the license plate light. This step-by-step guide will help you in getting the new LED light for your number plate.
Your license plate will have some screws that you will remove to replace the light of the license plate. If there is no screw then you have to do this from inside the truck. Hence there is more than one way to do this process.
Table of Contents
When Do We Need To Replace the License Plate Light?
These lights work well for a lifetime. So these will work until your vehicle runs. Because they consume very little energy and all. But some factors contribute to the damage to these lights. So when these lights become damaged then these need a replacement.
Accidents, poor handling, and old vehicles are some common reasons to replace these license plate lights. There are several other factors too like when the water enters the license plate. Or if there is any problem in the working.
If the light bulb is damaged and all oxygen is removed from it there is a lot of contributing factors in damaging the license light.
Tips For How To Replace License Place Light From Outside
Here are the steps that you will follow to replace the license lights from outside. To do this you will need a screw by your side. And in most of the license plates, the screw is present. So you can easily do this from the outside.
- First of all, you have to locate the lights. These lights are present right above the number plate.
- Now use your screw to loosen the screws that are on the license light.
- Now you have to search for the wiring of these lights. The wiring is present in the car base. For this, you have to follow the wiring starting behind the number plate. And once you reach the final wire connect turn it clockwise. This will remove the wires from the wire base. And you will find these in the backside of your bumper.
- There is some plastic resistance that holds the license bulbs in its place. You have to press those and as soon as you press that the bulb will come out. So you don’t have to apply extra pressure on the bulb.
- Then, Remove the white and throw it away.
- Now attaching the new bulbs is easy. Attach the new bulb in the same way as you have removed the last one.
- By doing proper wiring, now fit the new license bulb in its original space and tighten the screws.
Remember before tightening the final screws you have to make sure that the new license bulb is working. To check this turn on your car and see if there is light or not. If then you can check the wiring again. and if that is correct it means the new bulb is default. After checking you can tighten the screw of the license plate bulb.
Tips To Change License Plate Light From Inside The Trunk
There is another way to change the light of the license plate from the inside. You can do this very easily from the inside as well. Here is how you can change the license light bulb from the inside.
- You have to unscrew and remove the plastic fasteners. That is holding the top truck to its place.
- Now you have to locate the license plate that is attached to a black wire. The wire of the license plate will be of tank color you have to turn these tan bases clockwise. Until you feel the loosened grip of these.
- Now, You can pull the bulb from the base. It is very easy you just need to apply some force.
- Now, add the new bulb in the same place without doing anything.
- Afterward, turn the vehicle on to check if the bulb is working or not.
- If it is working then tighten the screws and you are all set to use your new license bulbs.
Price Of License Plate Bulbs
License plate bulbs are very cheap. One of the best things is that they are easily available in any store. So you can get them anytime. Many online stores sell these bulbs in a variety of colors too. Different color license plate bulbs work when you are using a modified car.
However, you can get these bulbs for $2-$3 from any store. If you purchase them from an online store then you might have to pay shopping charges as well.
Conclusion
In conclusion, here is the guide for how to change the license plate light. The process of replacing the bulbs is very easy. Here is the step-by-step guide to this. You can do this in different ways. The way you choose will depend on your car model and how that number plate is fixed in your car.
Changing license plate lights is very essential. Because if you will drive your vehicle without changing the lights then you have to face fine. Your number plate must be visible while driving the car. Hope you all will find this helpful.
See Also…
What disqualifies you from getting an insurance license?(Opens in a new browser tab)
How To Fix Crankshaft Position Sensor Wiring Harness?(Opens in a new browser tab)
