How To Replace Cantilever On A Stylus?

Here is how you can replace the cantilever from your stylus. This device was used in the past but some people still use this. So it is very important to maintain this because this device is very sensitive to dust and all. Here is more on this topic. Read till the end.

To Learn How To Replace The Cantilever On A Stylus

Turntables are very sensitive devices. These devices were famous in the past a lot. But recently people keep them and use them as a hobby. As soon as you see the turntables you remember the old 90s times. These devices are very sensitive to dust and all. So if you have them then you have to keep them very carefully.

Various accessories are used to produce sound from the reorder of the turntables. One of the accessories is a stylus. Here is more information about the stylus and how to replace the cantilever on a stylus.

What Is A Stylus?

A stylus is a pen-like device that creates friction on the recorder. When it creates fiction it produces sound. There is another accessory that is attached to the stylus. This is known as the cantilever. This cantilever is the main part that comes in contact with the recorded cd.

So after some time, you have to replace this cantilever from the stylus. Otherwise, it will damage the whole turntable. If you use your device regularly then you have to replace it almost every month. While if you do not use that every often then you can replace it once in 5 to 6 months.

Steps To Replace The Cantilever On The Stylus

Here are some steps that you need to follow to replace the cantilever.  This is a very simple process. All you should know is the name of the parts of your device. If you do not know the parts then check your device manual. In that manual, you will see the names of the different parts.

• The lower part of the stylus is detectable. So all you have to do is detach that part.
• Simply place the stylus in your hand and pull it upwards lightly. You do not require much force to pull this out.
• Make sure that you use the same model cantilever to replace it. You can replace it with some cheaper pens too. But that will not run for a long time and there is always a chance to damage the main device. So make sure that you use the same model only.
• Now all you have to do is fit the new cantilever on the palace of the old ones. It is very easy to fit. Try to push the cantilever inside with a little force.

If you are using some other version then you have to be very careful while fitting it. Because there is a chance that you might damage the stylus. So look carefully before replacing the cantilever.

Conclusion

In conclusion, this is how you can replace the cantilever of your stylus. It is necessary to replace the cantilever from time to time. The process is also very easy. If you are using the right accessories then there will be no precautions. But if you are fitting some other model accessories then there is a chance of damage. So make sure that you select your accessories wisely. Hope you all will find this helpful.

See Also…

How Much Does A Dental Bridge Cost With Insurance?(Opens in a new browser tab)

How Long Does A Tire Change Take?(Opens in a new browser tab)