How to

How To Trick A Mass Air Flow Sensor {Help Guide}

March 11, 2023

453

Here is how to bypass the mass air flow sensor in your car. This is the only method to do this process. In this article, we will show you how to trick a mass air flow sensor. So, you can try to avoid any other methods. All you need to have is the duplicate mass air flow tube. You will find that anywhere at a very cheap price.

Table of Contents

How To Trick A Mass Air Flow Sensor?

A mass airflow sensor is useful in the car as an indicator. Bypassing a mass airflow sensor is not generally necessary. And this thing consumes a lot of time as well as money. So people like to avoid this thing a lot. Because bypassing does not affect the car in any way or the performance of the car. So people like to save some money. You can easily avoid the mass air flow bypass.

There are some tricks that you have to do to trick the MAF sensors. Even if you are a beginner you can do this without any damage. Tricks the mass air flow sensor this is the only method. so do not try any other method. Because you might end up destroying the car. Here is the tutorial for how to trick a mass air flow sensor.

What Is A Mass Air Flow Sensor?

The car exhaust system is connected to the mass air flow sensor. Any type of leak in that system is detected by the MAF sensor. You need to check the engine light for the signal. You will see an on-and-off light on the ignition system. This will indicate the damage or leaks in the exhaust system. So this is a very important part of the car. Do not try to remove the MAF source to avoid bypassing the air intake system.

What Happens If You Bypass The Mass Air Flow Sensor Of The Car?

The mass air flow sensor bypassing will lower the amount of air passage in your system. So your engine will become more heat sensitive than before. This is the only disadvantage that you will face after bypassing the mass air flow sensor. Remember that the mass air flow sensor helps in maintaining the air and the engine oil input and output in the engine. So you might face some problems with the airflow. You have to drive the vehicle properly for this. Try not to drive for too long after avoiding bypassing the mass air flow sensor.

Things Required To Avoid Bypassing Of MAF Sensor

There is nothing much that you will need to avoid this process. All you need to have is the duplicate mass air flow sensor tube. This tube will be easily available in your nearby store. Also, it is very cheap. The original tube that is found in your car is made up of plastic. But this tube has been built of metal. So it is more durable. And you probably required only one. So keep this by your side before doing anything to avoid bypassing the mass air flow sensor.

Instructions To Trick Mass Air Flow Sensor

Here are the instructions that you have to use to avoid bypassing the mass air flow sensor. Make sure that you follow all the steps properly for the bypassing process. You can also take help from the car manual to see the part names and use and this will decrease the risk of damage as well.

The first step is to heat the duplicate mass air flow sensor. The temperature should be equal to the original MAF sensor. So you have to keep this tube behind the car ignition. Heat this at the same temperature.
Use any type of gas to bypass that heated tube. Gasoline for cars is not accepted. So try to avoid that. But other than that you can choose any gas. Try to see how much mixture of air and fuel it will produce. Observe as you bypass the gas through the tube.
Now observe the heat flow. For some time you might see extra heat flow. But after some time it will come to normal temperature. But if the situation persists then you have to change the original mass air flow sensor. because this will depict the damage to the mass air flow sensor.

These are all the steps that you need to follow but It is nothing much. All you have to think about is heat management. If you are still facing the problem then you can take help from any experienced person.

The Disadvantage Of The Mass Air Flow Sensory

There are some disadvantages to having a mass air flow sensor. You should know about these too. Because the possible advantages are mentioned above. Here is a list of some disadvantages.

The mass air flow sensor makes more power release from the engine. Hence the engine becomes worn out unnecessarily. So the engine age reduces.
The engine has improper combustion due to this. Hence more carbon monoxide is produced from your car. The more carbon monoxide released from the engine the more damage it will cause. So try to keep an eye on your engine while having the mass air flow sensors.
The engine will start to use too much oil. So it will take you to refill the tank again and again. And it can increase the cost of your monthly fuel.

These are all the disadvantages that you will see with the mass air flow sensor. You might not face any problems but it affects the engine particularly. So you have to keep looking at your engine performance from time to time.

Conclusion

In conclusion, here is how you can bypass the mass air flow sensor in your car. This is the only way to do this. But if your problem is persisting then you have to change the original mass air flow sensor of your car. This article will serve as a complete guide for you to do this. You can take help from the car manual to know the different part names of the engine.