There are several ways to fix the pocket or scratching. Your selected methods will depend upon the cause of the scratching. it is easy to detect the cause. Here are some solutions to fix the pocket door scratching. Read more below.
Table of Contents
Methods to fix pocket door scratching
All the sliding doors have pockets to stop the door. Of course, you can see these pockets are located at the bottom of the door. Hence during the door openings, these pockets leave scratches on the floor. These scratches look very ugly on the floor. And there is no way that you can remove these scratches permanently. Because these will reappear as soon as you open the door. So the best solution to this problem is to fix the pocket door. Now you will ask how to fix pocket door scratching. Read this article and you will look at different methods to stop this.
The reason behind the pocket door scratching
The reason behind this could be many. Here are some most common reasons for pocket door scratching. If your door has a worn-out wheel, it is a guarantee that you will have some nasty scratches. This happens when the pocket door hardware is reused. Due to this, they wear out easily.
Another big reason is that the space between the pocket door and the floor is very negligible. And last but not least is the pocket angel on the door. The last two are manufacturing defects. All you can do is complain to the manufacturer and ask him to replace the door or fix the door.
To learn how to fix pocket door scratching
There are several steps that you need to go through before doing anything. Because knowing the reason for the problem is a must. Here is the step-by-step guide to detecting the problem of pocket door scratching.
1) Look and identify the problem. You can check all the joints and the bottom of the door. Make sure you check in the proper light.
2) After seeing the problem, check the door guide. And match the exact cause of the problem.
3) And If after solving the problem the scratch continues then think that it is due to wood wrapping.
Related- How To Place A Door Icarus- {Simple Guide}(Opens in a new browser tab)
Pocket door fixing
different problems need to be fixed in different ways. Hence every single reason for the pocket door scratching needs to be fixed differently. That’s why knowing the exact cause of the problem is very necessary.
1) If the scratching is happening due to the nails and bolt then you need to add more to the nails. By lubricating the nails you will reduce the fiction. And in turn, the door will produce any scratches, and also the unwanted noise will be removed too.
2) A narrow gap between the door and the floor will require you to cut the door from the bottom if there is not enough space between the door and the floor. You should visit any door manufacturer for this. Because cutting the door evenly from the bottom is necessary.
3) Now, houses have perfect vertical walls. But, the old houses have some plumps in the wall. So, If that is the case then you need to fix the wall. Just make sure to vertical the part that comes under the door and you will be good to go.
4) Sometimes moisture and humidity cause the wood to expand and company. Hence the door becomes distorted. Like high from one side and low from the other. To avoid this you have to check the door and scratch the high end of the door.
Conclusion
In conclusion, there are several ways to fix the pocket door scratching. But for this, you need to find the exact reason for the scratching. All the methods to solve all kind of door scratching is mentioned above. You can look above to find the solution to your problem. Pocket door scratching needs to fix immediately. Because it can cause serious damage to your floor. And Scratches will remain permanent on the floor. Hope you will find this helpful.
See Also…
How To Grow Your Nails Overnight With Vaseline?(Opens in a new browser tab)
Learn How To Cash Out On Doordash?(Opens in a new browser tab)